How to Install HiLetters Neon Sign

There are two ways how to install your HiLetters sign. One is to look for a neat surface where you can place your HiLetters sign as a neon letter desk sign. Another way is to use HiLetter’s wall mounting accessories to turn this standing letter neon sign into a wall decor.

Installation Methods

Click the buttons below to jump to the section you want to check.

Watch This Quick Installation Process

Here’s an easy-to-follow video on how to light up your HiLetters neon light.

Neon Letter Desk Sign

HiLetters is one of our favorite neon signs. You don’t need anything else besides what you have in the box to light it up. It’s super easy to use and fun too! It’s an upgrade to your usual DIY letter boards, which makes it ideal for home or business use.

What’s in the Box?

●   Selected magnetic letter neon lights

●   Magnetic railing

●   12V Power adapter

●   Black cord with plug: 1m (3ft)

Installing Your Desktop Neon Sign

Installing Hiletters is easy as 1, 2, 3!

Step 1

Choose the neon letters you want to use to create your message on the magnetic railing.

Step 2

Place the letters in the gap into the magnetic railing. It will automatically connect and stay in place even when you put it upside down.

Step 3 

Connect all the wirings together on your magnetic railing, plug it in, and light it up!

Download the Printable PDF Manual

Mount to Wall

Mounting your HiLetters LED neon lights is another great way to show your message for many to see.

Things to Prepare

Get your neon sign and accessories and don’t forget to grab a few more things in your toolbox. 

●   Wall mount accessories (2)

●   Screws

●  Drywall anchors

●   Hammer

●   Screwdriver

●   Driller with a ¼” (6mm) drill bit

●   Tape measure

●   Pencil  

How To Mount Your HiLetters On The Wall

Step 1

Select the letters you want to use to create your message.

Step 2

Place the letters in the gap into the magnetic rail. It will automatically connect and stay in place even when you move it upside down.

Step 3

Using a tape measure and a pencil, mark the lines where you want to mount your neon sign.

Step 4

Position the wall mount accessories on the wall. Mark the holes from your sign to determine the screw hole locations.

Step 5

Drill the marked areas. Make sure that your driller is ready with a ¼” (6mm) drill bit. Do the same for both sides.

Step 6

Once you have the holes ready, take the drywall anchors and tap them into the wall using a hammer.

Step 7

Now align the holes of your and it’s time to screw in the nails into the drywall anchors.

Step 8

Now unscrew the cap on both ends of the magnetic railing and slide the wall mount in. Once in place, put back the cap and screw it in place.

Step 9

The last step, connect all the wirings together on your magnetic railing, plug it in, and light it up!