US$159.00 – US$199.00
Snow snow snow.. wishing to have a white Christmas this year! Snowflake neon signs are great for winter display and decorations.
Included in the package: nails, sign connector, dimmer controller, adaptor and power plug.
Two Sizes:
40CM*40CM
60CM*60CM
Different neon width available for your every design need. The standard available neon width is 12mm, which is available in all colors. There are two thicker neon width at 14mm and 25mm for larger designs. A slim neon at 8mm is available, but in single color only. Please note that the slim neon may be required to recreate smaller sized shapes.
Waterproof HiNeon signs available to accommodate all your event needs. Permanent outdoor installation would require additional notice as regulations may differ depending on your whereabouts.
Our neon tubes can produce all sorts of colors, providing an industry-best color matching service.
Cool white, Warm white, Red, Green, Blue, Baby blue, Yellow, Pink, Orange, RGB (14mm+)
The acrylic backdrop provides a variety of color to choose from. Aside from standard colors, we also support UV printing on the backdrop, enabling more creativity to your design.
Customize your backdrop acrylic to fit better with the rest of the design or surroundings. We have a wide variety of choices.
Our product operates at a very low voltage of 12V, which makes the product very easy and safe to handle. It also uses low power, reducing energy waste and electric bill costs.
Here is what you get in the package; metal beams, letters, power adaptor, wire connectors, beam stoppers, screw holders, 4mm screws, clear acrylic supporter, XXmm screws.
Flip the metal beams to the back where the holes are. Align the clear acrylic supporter and lock it with the 4 mm screws.
Flip it to the font.
Choose your preferred wire exit of the sign. Place the red wire at the top of the sign and the white wire at the bottom.
Fill the opposite side with the beam stoppers.
Install the adapter to the sign and plug into the outlet.
Place the letters on the beam and make sure the letters work before mounting the sign.
Place the metal beam against the wall and mark the areas where it needs to be drilled on the wall
Drill a hole on the wall at the marked areas
Insert the nail holders with a hammer where the holes are.
Align the holes with the sign
Drill the screws accordingly
Arrange the characters back to the beams and your sign is ready light up.
